close
close

How To Measure Trailer Axle Alignment

How To Measure Trailer Axle Alignment. • set the designed kingpin height. How to align a tandem boat trailer axle.

How To Measure Trailer Axle Alignment unugtp from unugtp.is

Both dimensions should be the same. Compare the distances between the right wheels and the left wheels. Take the tires off the rims, and bolt the 2 stub axles to them using the lug nuts.

1.Hold The End Of A Tape Measure On The Inside Of One Of The Trailer Tires At The Outer Edge Of The Wheel Rim As Close To The Front Of The Trailer As Possible.

Measure from the straightedge to the frame in front of the wheel and record the measurement. Measuring properly to check trailer tire alignment requires parking your trailer on a flat surface. Once you have the required tools, it’s time to measure the trailer alignment.

− Tape Tensioning (Spring) Device Required For Measurements With Tape Measure.

A drop axle just allows the trailer to sit lower, usually 4″ for a leaf spring style. They should be identical or within 1/8 of an inch, give or take 1/16 of an inch. Use a 1/4” drill bit to drill a pilot hole in the hanger.

• Properly Position The Trailer.

Do the same on both sides of the trailer to complete your trailer axle alignment. This procedure involves several steps: Measurement # 2 = spring center.

Lower The Trailer Tongue Jack Stand.

On a dual axle trailer, you can also measure the axles to make sure they are aligned with each other. Do the same on both sides of the trailer to complete your trailer axle alignment check. On the other hand, when the.

Adjust The Height Of The Landing Legs Trailer To The Specified Kingpin Mark.

Another way to check the alignment of a dual axel trailer is to measure. Make sure the tires are fully inflated and the trailer is packed as if you are going to travel now. Do the same on both sides of the trailer to complete your trailer axle alignment check.

Tags: ,

Leave a Reply

Your email address will not be published.

Related Post