How To Temporarily Fix A Ring That S Too Big 2. Chop the top from the bottom, carefully! The most common means to enlarge the ring size is to add metal to increase the band’s circumference.
Thin bands may break or you may reduce the life of the ring significantly. Jumbo size ring guards are best for class rings with thick bands. If this method is still difficult for you, lubricate.
Table of Contents
If The Skirt Is Lined, Use A Seam Ripper To Detach It From The Skirt For A Few Inches Away From Your Marking Pin.
This easy fix will make your ring fit tighter cheaply, without messing up the band, and without any jewelry skills. Stitch a stay tape for the neckline. For example, some people do it because of weight loss or weight gain when the band becomes too loose/tight.
Your Ring Is Too Large For Your Finger.
Sometimes, people perform a resizing of their rings simply because they want to wear the ring. This modification should last for several weeks, even if the bandage gets wet. They act as a temporary solution to ring resizing.
Shawl It About The Intimate Of The Ring, Adding Layers At The Bottom Part Of The Ring As Needed To Make The Wanted Fit.
Make sure the width is not more than 3/8 of an inch. Put the ring inside the open pliers so the outside curvature runs along the pliers. For this method, little metal beads are polished into a circular shape before a jeweler welds them into the ring.
The Ends Are Soldered To This New Piece Of Added Metal.
Remember to account for seam allowance! If this method is still difficult for you, lubricate. You know how nail polish stinks?
In This Process, The Jeweler Will Snip The Ring’s Band (Or Shank) And Insert A Small Piece Of Metal Between The Two Cut Ends To Expand The Ring’s Size.
Jumbo size ring guards are best for class rings with thick bands. Chop the top from the bottom, carefully! With some creativity, your ring will be snug.